This 4099 CORE for Loud SPL solution is designed to address the unique mounting challenges of slim bodied and unusually shaped instruments. The design of the microphone clip includes a hook-and-loop fastener strap, which allows it to fit instruments of varying sizes and diameters such as the oboe, clarinet, bassoon, recorder and flute.

The fastener strap pulls tight to fit the circumference of the instrument, like a wristwatch on your arm. On instruments of a large diameter, additional fastener straps can easily be added to extend the clip’s reach. It is lightweight, unobtrusive and designed to stay out of the way during performances, using a revolutionary 90°-system which provides a wide range of mounting options. By detaching the clip from the gooseneck and re-mounting it turned 90°, the number of mic positions is doubled. Choose a 4099 CORE Universal Instrument Microphone (4099-DC-1-101-U) for your oboe, clarinet, bassoon, recorder and flute

FEATURES:
CORE by DPA technology inside
Supercardioid condenser microphone
Handles high SPLs
Superior gain-before-feedback
Flexible and easy mounting
Gentle and easy to mount on the instrument
Detachable cable and a versatile gooseneck extender

SPECS:
Directional characteristics : Supercardioid
Principle of operation : Pressure gradient
Cartridge type : Pre-polarized condenser
Frequency range : 20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in) distance : 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
Sensitivity, nominal ± 3 dB at 1 kHz : 6 mV/Pa; -44,5 dB re. 1 V/Pa (High SPL: 2 mV/Pa; -54 dB re. 1 V/Pa)
Equivalent noise level, A-weighted : Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) (d:vote High SPL: Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) : 71 dB (High SPL: 66 dB(A))
Total Harmonic Distortion (THD) : <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine (High SPL: <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine)
Dynamic range : 100 dB (High SPL: 95 dB)
Max. SPL, peak before clipping : 142 dB (High SPL: 152 dB
Output impedance : From MicroDot: 30 to 40 ohm; from XLR adapter: 100 ohm
Cable drive capability : Up to 300 m (984 ft) with XLR adapter
Output balance principle :&#160;Signal balanced with XLR adapter
Common Mode Rejection Ratio (CMRR) :&#160;> 60 dB from 50 Hz to 15 kHz with XLR adapter
Power supply (for full performance) : Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power +/- 4 V with XLR adapter
Current consumption : Typ. 1.5 mA (microphone). 3.5 mA with XLR adapter
Connector : MicroDot
Color :&#160;Black
Dimensions :&#160;Microphone weight: 46 g (1.62 oz) Capsule diameter: 5.4 mm (0.2 in) Microphone length: 45 mm (1.8 in) Cable length: 1.8 m (6 ft)
Polarity :&#160;Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on XLR adapter)
Temperature range :&#160;-40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH) :&#160;Up to 90%
Gooseneck length :&#160;140 mm (5.5 in)