The Schrack Vartec series is a pure surge arrester series (TII). This series was tested and certified in accordance with IEC/EN 61643. The use of SCHRACK Vartec arresters is necessary in every consumer installation, which is newly built or significantly altered. In indoor mounting not dependent on position the national installation regulations must be followed (Austria: ÖVE/ÖNORM E 8001). Through their plug-in design, these arresters are very easy to replace in the case of an overload to an arrester.
| Order No. | IS010354 |
| SPD continuous voltage | 320VAC |
| Nominal discharge current (8/20) In | 20kA (8/20) |
| Max. discharge current (8/20) Imax | 40kA (8/20) |
| Protection level Up | ≤ 1,5kV |
| Restspannung bei 5kA (8/20) Ures | ≤ 1,1kV |
| Folgestrom In | - |
| Response time tA | 25ns |
| Thermische Abtrennung | Yes |
| Vorsicheru | max. 125Ag |
| Kurtschlussfestigkeit Isccr | 25kA/50Hz |
| Geprüft nach | IEC/EN 61643-11 |
| Gehäusematerial | Thermoplastic; UL 94V-0 |
| Temperaturbereich | -40°C - +80°C* |
| Breite (DIN43880) | 1TE |
| Abmessungen (mm) | 17,7 x 61 x 47 |
| Gewicht (g) | 55 |
| Montage | Vartec-Sockel VVM |
| Codierung | Ja |
| Fehleranzeige | Ja |
