GAS GAS solenoid valves have been designed to be combined with any gas detection system. Shut off the main outlet when an emergency situation is detected.
They have been installed at the gas piping and connected with a gas detector. Interrupt the gas flow in a danger situation.
The electro-valve is normally located after a filter, upstream of the regulation apparatus and preferably outside the measurement zone. It has been installed with the arrow stamped on the body turned towards the user appliance. To reset the solenoid valve pull the reset knob.
They have been installed at the gas piping and connected with a gas detector. Interrupt the gas flow in a danger situation.
The electro-valve is normally located after a filter, upstream of the regulation apparatus and preferably outside the measurement zone. It has been installed with the arrow stamped on the body turned towards the user appliance. To reset the solenoid valve pull the reset knob.
0497 
Standard Specification:
Alimentation: 230 Vca – 24 Vca – 12 Vca
Body: aluminium
Working temperature: -15°C / +70°C
Closing time: < 1 sec
Max pressure: 550 mbar
Protection level: IP65
Connections: flanged UNI 2223
Weight: DN65=7.0Kg DN80=7.50Kg, DN100=9.5Kg
| TYPE | CONNECTION | FLOW | POWER | A MM | B MM | POWER SUPPLY |
|---|---|---|---|---|---|---|
| VR560/12 | DN65 2” ½ | 170 (mc/H) | 19 W | 246 | 395 | 12Vcc |
| VR560 | DN65 2” ½ | 170 (mc/H) | 17 VA | 246 | 395 | 230Vac |
| VR570/12 | DN80 3” | 170 (mc/H) | 19 W | 265 | 395 | 12Vcc |
| VR570 | DN80 3” | 170 (mc/H) | 17 VA | 265 | 395 | 230Vac |
| VR580/12 | DN100 4” | 280 (mc/H) | 19 W | 265 | 420 | 12Vcc |
| VR580 | DN100 4” | 280 (mc/H) | 17 VA | 265 | 420 | 230Vac |
