No Bottom Bucket

Material : HDPE/NYLON/UHMWPE                                
Features :                                
• Bottomless elevator Buckets for agricultural use.                                 
• An assembly of several bottomless elevator buckets and one bucket with bottom is installed at a close spacing on the belt. This will allow materials to be conveyed continuously allowing larger capacity.                                
 Capacity will increase 1.5~2 times by using bottomless elevator buckets. Bottomless elevator buckets can be used at higher discharge speed.                                
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.                                
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc                                
Using Recommendations:                                
• Minimum bucket spacing: Buckets spacing in one group= “C” +1mm; Bucket spacing between the groups= Bucket Projection“B” Bucket Depth “C” +25mm.                                 
• For engineering purposes, we recommend using “L” for usable capacity.                                  
• Mounting holes can be customized on request.                                
                                
Technical Specifications :

Model	Bucket Dimension* (mm)			Mounting Holes (mm)				Capacity (L)
	Length A	Proj. B	Depth C	Distance Down D	PCD E	Standard Punching Holes	Hole Diameter
BB0706	72	62	30	14	30	2	6.5	0.08
BB1109	110	92	50	20	60	2	6.5	0.21
BB1109A	110	92	45	22	60	2	6.5	0.25
BB0907	90	78	33	15	40	2	6.5	0.18
BB1310	130	102	45	20	70	2	6.5	0.36
BB1311	130	110	45	18	70	2	6.5	0.36
BB1812	186	125	60	25	90	2	8.5	0.85

• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.                    
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.                     
• A direct replacement for many other international brands.                     
• Unique elevator bucket design with multiple patents.                     
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.

Material	HDPE	Nylon 6	UHMWPE	PU	Mild Steel	Stainless
Cost	1	3	3	4	2	4
Wear Resistance	1	2	3	4	3	4
Impact Resistance	1	2	2	2	2	2
FDA Food Approved	Yes	Yes	Yes	No	No	No
Max Temp℃ Continuous	70	100	70	60	180+	250+
Max Temp℃ Peak	80	120	80	70	220	400

Remark : Code 1 = low  4 = high                                
                                
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .   
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.                                
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.                                
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.                                
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.                                
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.