Material : HDPE/NYLON/UHMWPE/PU
Features :
• Optimum industrial style elevator bucket with a heavy reinforced lip and corners and a thickened back wall for mounting strength.
• Well suited to conveying of ore, sand, gravel, coal, fertilizer, clay, salt, limestone and cements or any product.
• Weight reduction of up to 80% compared to traditional cast iron elevator buckets.
• Using less energy due to lighter material being used.
• Up to 25% more capacity than cast iron elevator buckets.
• Extended bucket and belt life, less maintenance, less elevator downtime.
• Cleaner discharge, reduced build-up in the bottom of the buckets.
• Non corrosive, non sparking, heat resistant, impact and abrasion resistant.
Using Recommendations
• Recommended minimum bucket spacing: bucket projection 'B' × 2.
• Mounting holes can be customized on request.
Technical Specifications :
| Model | Bucket Dimension* (mm) | Capacity(L) | ||||||
| Length A | Proj. B | Depth C | D | D1 | E | H | ||
| EB400 | 415 | 213 | 213 | 45 | 35 | 75 | / | 7.2 |
| EB315 | 338 | 213 | 200 | 40 | 40 | 40 | / | 7.1 |
| EB250 | 264 | 233 | 220 | 40 | 40 | 80 | / | 4.95 |
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.
• A direct replacement for many other international brands.
• Unique elevator bucket design with multiple patents.
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
| Material | HDPE | Nylon 6 | UHMWPE | PU | Mild Steel | Stainless |
| Cost | 1 | 3 | 3 | 4 | 2 | 4 |
| Wear Resistance | 1 | 2 | 3 | 4 | 3 | 4 |
| Impact Resistance | 1 | 2 | 2 | 2 | 2 | 2 |
| FDA Food Approved | Yes | Yes | Yes | No | No | No |
| Max Temp℃ Continuous | 70 | 100 | 70 | 60 | 180+ | 250+ |
| Max Temp℃ Peak | 80 | 120 | 80 | 70 | 220 | 400 |
Remark : Code 1 = low 4 = high
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved),
Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.
