Directions:
- Ensure surfaces to be bonded are dry, clean and free from dust, oil or grease. Unscrew cap and pierce seal carefully.
- Apply adhesive to entirely cover both surfaces evenly. Keep both surfaces apart until adhesive almost dry (approx. 10-20 minutes).
- Align edges and press both surfaces firmly together. Maximum bond strength achieved after 24 hours.
- Wipe nozzle clean and replace cap immediately after use.
Avoid contact with eyes and skin. Avoid breathing vapour, vapour may cause drowsiness and dizziness. In case of skin contact, wash immediately with soap and water. In case of eye contact, flush with water immediately and seek fot medical advice. If swallowed, do not induce vomiting and get immediate medical advice. This product is highly flammable, keep away from any source of ignition. USE IN A WELL VENTILATED AREA. KEEP OUT OF REACH OF CHILDREN.
Disclaimer:
All product images shown are for illustration purpose only. Actual products may vary in term of size, brand, version, color, and other relevant characteristics.