Features
.png)
.png)
12-24VDC 2-wires loop-powered
3 NPN Output
2 Relay Output
Voltage Output
RS485 MODBUS
Explosion-Proof
Free adjust of the range of analog output
The probe can be made for IP68, anti-corrosion, explosion, small blind, low power consumption, wide range.
Backup and recovery parameter setting.
Custom serial port data format
Set a filter value to remove
Output HART, it can be directly communication with other instrument. (Optional)
Working Principle
ApplPPLication
Sewage Water
Tank application
Chemical
Water supply system
Industry waste water
Sewage Water
Tank application
Chemical
Water supply system
Industry waste water
Working Principle
Ultrasonic level meter works according to the transit time
method. The ultrasonic sensor will pulse the ultrasound from
sensor to a measure medium surface and it will be reflected
back from the medium surface due to density change on
medium. Time (t) taken for an ultrasound travel from sensor
and back to the sensor are proportional to the travelled
distance (D). Transmitter detected the time (t) and calculated
the distance (D) according to the know speed of sound (c).
The formula; D = c •t/2
To determine the medium level (L), the sensor installation
height (H) is set in parameters setting. Therefore, it can
calculate the medium level as follows:
The formula; L = H – D
Since speed of sound through air is affected by changes in
temperature, the ultrasonic sensor has integrated a
temperature sensor to improve accuracy.
