You have added this product to your favorite list.
You have removed this product from your favourite list.
This company has been added successfully. Check My Favourite.
This company has been removed from your favourite list.
This company has been added to your inquiry cart.
This company has been removed from your inquiry cart.
This product has been added to your inquiry cart.
This product has been removed from your inquiry cart.
Maximum number of Product/Company has been reached in inquiry cart.
Login to NEWPAGES
Stay signed in
Daily Login Reward

Congratulations! You’ve earned your daily login reward for today!

5 NP PointHere are the reward you’ve earned!
Check your Daily Login Rewards

Be sure to come back everyday for more rewards!
Thanks!

Back
Seni Jaya Logo
Visitor

Kawada Linear Bushing Lubrication Guide

02-Oct-2021

Lubrication

Kawada Linear Bushings require grease or oil as lubricant for optimal operation.

Our Linear Bushings come pre-lubricated from the factory. However, you may choose to apply additional/replacement lubrication as required.

This document will cover the basic principles of Linear Bushing lubrication.

Grease Lubrication

Before mounting the product onto the LM shaft, apply grease to each row of balls inside the Guide Ball Bushing. 

Thereafter apply grease as necessary, in accordance with usage and other conditions as required,

if housing with grease nipple & channel are present as shown in Fig.1, apply grease with a grease gun,
or apply grease directly to the LM shaft, after cleaning the shaft of any debris.

We recommend using high-quality lithium-soap group grease No. 2. (aka NLGI Grade 2 Grease)

Oil Lubrication

To lubricate, apply lubricant to the LM shaft one drop at a time, as needed, or through housing with grease nipple & channel
as shown in Fig.1 , in the same manner as when lubricating with grease.

Commonly used lubricants include turbine oil, machine oil, and spindle oil.

Grease Consistency

The most commonly used greases, such as those used in automotive bearings, would use a lubricant that is NLGI grade 2,
which has the stiffness of peanut butter.

Grades within this range can operate in a higher temperature range and at higher speeds than NLGI grades 000-0.

Greases for bearings are typically NLGI grade 1,2, or 3.

 


Send us your inquiry or question
Main Office

WHEELER MECTRADE (S) PTE LTD
48, Toh Guan Rd East #03-99, Enterprise Hub, 608586 Singapore.
Google Maps Waze

Tel: +65-6563 8501
Fax: +65-6560 4853

Email: wheelermectrade@singnet.com.sg, garry@wheelermectrade.com
Website: https://www.wheelermectrade.com
Website: https://wheelermectradenp.newpages.com.my/
Website: http://wheelermectradenp.n.my/

Powered by NEWPAGES