OSRAM OT 150/220-240/1050 P7
-
150/220-240/1050 P7
- High surge protection : up to 10 kV
- High efficiency (up to 94%)
- Fix current for optimized fixture design
- Over temperature protectiom
- IP rating : IP67 (Independent installation)
- Long lifetime
- Street and urban lighting
- Industry lighting
- Suitable for luminaires of protection class I
- Nominal voltage : 220…240 V
- Input voltage AC : 198…264 V
- Nominal current : 0.6 A
- Mains frequency : 50…60 Hz
- Power factor λ : > 0.95
- Total harmonic distortion : < 5 %
- Device power loss : 10.5 W
- Inrush current : 60 A
- Max. ECG no. on circuit breaker 10 A (B) : 3
- Max. ECG no. on circuit breaker 10 A (C) : -
- Max. ECG no. on circuit breaker 16 A (B) : 6
- Max. ECG no. on circuit breaker 16 A (C) : -
- Max. ECG no. on circuit breaker 25 A (B) : 9
- Surge capability (L/N-Ground) : 10 kV
- Surge capability (L-N) : 6 kV
- Nominal output power : 105…150 W
- Maximum output power : 150 W
- Efficiency in full-load : 93.5 %
- Nominal output voltage : 100…143 V
- U-OUT (working voltage) : 160 V
- Nominal output current : 1050 mA
- Output current tolerance : ±5 %
- Galvanic isolation : basic
- Length : 167.0 mm
- Width : 60.0 mm
- Height : 33.0 mm
- Mounting hole spacing, length : 153 mm
- Product weight : 560.00 g
- Cable cross-section, input side : 1.0 mm²
- Cable cross-section, output side : 1.0 mm²
- Wire preparation length, input side : 10 mm
- Ambient temperature range : -40…+55 °C
- Temperature range at storage : -40…+85 °C
- Maximum temperature at tc test point : 85 °C
- Max.housing temperature in case of fault : 110 °C
- ECG lifetime : 50000 h
- Dimmable : No
- Suitable for fixtures with prot. class : I
- Intended for no-load operation : No
- Number of channels : 1
- Type of protection : IP67
- Standards : Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 62384/Acc. to EN 60598-1 (ED.8)
- Approval marks – approval : CE / CCC / TISI / RCM / ENEC 25
