Product Description
Petro-Canada’s REFLO A is an ammonia refrigeration compressor fluid used in industrial refrigeration systems. REFLO A is formulated to outper form solvent refined paraffinic and naphthenic refrigerant oils by extending service life while significantly reducing operating costs. REFLO A’s superiority results from more than 25 years formulating experience. Using a patented HT purity process, Petro-Canada produces 99.9% pure base oils – one of the purest in the world. Free of impurities that can hinder fluid per formance; these crystal clear base oils are fortified with specialty selected additives. The result is a refrigeration compressor fluid that offers reliable, long-term per formance with significant operational cost savings.
Product Features
Additional Performance Benefits
- High viscosity index ensures proper lubrication and protection from wear over a wide range of operating temperatures
Applications
REFLO A is formulated to lubricate ammonia refrigeration compressors used in large commercial operations such as cold stores, food processing plants, marine systems and ice arenas. REFLO A is also used in manufacturing industries that require low temperature control, such as pharmaceuticals and microelectronics. REFL0 A can be used in ammonia refrigeration systems where evaporator temperatures are greater than -42°C/-44°F. REFLO A is compatible with mineral oils such as solvent refined (SR) paraffinics and naphthenics, and may be used to top-up systems using these types of fluids. The full benefits of REFLO A will not be realized without a complete fluid change-out. Most OEM's use Neoprene® (Polychloroprene), HSN (Highly Saturated Nitrile) or BUNA N (Nitrile) and REFLO A fluids are fully compatible with these types of materials. However, when a compressor is converted from one oil formulation or type to another, there is always a risk of seal swell or shrinkage. Unlike naphthenic fluids or fluids derived from aromatic chemicals such as alkyl benzenes, REFLO A fluids cause little or no seal swell. Although tightening flanges can sometimes correct minor leaks, we advise that whenever possible, new seals should be retrofitted during the oil conversion. Follow the OEM's seal recommendation for Hydrotreated Paraffinic oil (ie. Mycom W series reciprocating compressors should use HSN or Neoprene® only).
OEM Approved
REFLO A is approved or meets the requirements of most major compressor OEM’s, including:
- Acceptable as a lubricant in and around food processing areas where there is no possibility of food contact
Typical Properties
TYPICAL PROPERTIES | ASTM TEST METHOD | DIN TEST METHOD | REFLO | |
46A | 68A | |||
Density, kg/L @ 15°C | D4052 | - | 0.860 | 0.866 |
Viscosity, cSt @ 40°C | D445 | 51550 | 46 | 58 |
cSt @ 100°C | 6.9 | 7.9 | ||
SUS @ 100°F | 237 | 268 | ||
SUS @ 210°F | 49 | 52 | ||
Viscosity index | D2270 | - | 106 | 104 |
Pour point, °C/°F | D97 | 51597 | -42/44 | |
Flash point, °C/°F | D92 | 51376 | 222/372 | 236/457 |
Foam characteristics, ml | D892 | 51566 | ||
Sequence 1 | 0/0 | |||
Sequence 2 | 10/0 | |||
Sequence 3 | 0/0 | |||
Total acid number (TAN), mg KOH/g | D664 | 51558 | 0.05 | |
Specific heat, | - | 46 | ||
Calories/g/°C, 38°C | 0.47 | |||
BTU/lb,100°F | 0.47 |
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei