HONDA - Ultrasonic Cutter (ZO-41Ⅱ)

HONDA - Ultrasonic Cutter
Brand: Honda Electronics
Model: ZO-41Ⅱ
 
Features:

• An ultrasonic cutter using 40,000 ultrasonic vibrations per second with non-audible sound to assist in reducing the friction during the cutting process.
• The latest version of Honda Electronics Ultrasonic Cutter. The new ZO-41 includes the following improvements:
• All the enhancements of the ZO-40 plus:
• The AC adapter makes this unit plug-in and uses worldwide.
• Continued compatibility with most blades across the full line of Ultrasonic Cutters.
• TAF circuit to enhance the cutting consistency especially with hard to cut materials.
• Locked “ON” activation switch – 10 minute operation.
• Switchable between NORMAL and HIGH Power for difficult to cut materials (5-minute operation).

 
Applications:
 
Ultrasonic cutting of plastics, rubber, foam cutting patterns, cardboard, leather etc. Used for light production cutting and trimming, model building, radio control vehicle fabrication, doll making, model sailboat construction, hobby and craft making.
 
Examples of material cutting capabilities (estimate) Cardboard: less than 2mm
ABS: less than 3mm PET: less than 3mm
PP and Acrylic: less than 3mm
For hard materials or continuous usage (greater than 10 min.) consider the USW335-Ti cutter. Results may vary with the type of material. Please consult us in advance.


Specifications:

Oscillation frequency	40kHz
Maximum output	30W
Maximum power Consumption	40W
Power	Input: AC 100V-240V, 50/60Hz, 80VA Output: DC 12V, 3.5A
Dimensions (mm)	Transmitter: 173 x 89 x 76 (not including protrusion) Hand-Piece: D=32 x L=144 (excluding blade)
Temperature	5 °C ~ 45°C
Circuit Protection	Over-temperature thermostat circuit Thermal shutdown if temperature is above 70°C Pressure switch if excessive force is exerted on blade.
Weight	Transmitter (body): Approx. 260g Hand-piece: About 700g (including output cord)
Power Cord	1.4m
Output Cord	1.6 cm (Straight cord)