Hitachi Bebicon Compressors Piston Type

How to choose a BEBICON Compressor

• Select Compressor type according to your requirement.
• Select necessary pressure and air capacity.

As a reference,necessary pressure should be 0.2 MPa higher than the working pressure in need,and necessary air capacity should be 10 to 20% more than the one in need.(Air capacity indicated in this catalogue is valued at maximum discharge pressure and converted at its inlet condition)

• Confirm the details of power source(Voltage/Phase/Frequency)
• Confirm if there is any regulation on noise control.

Note : Make sure to confirm the frequency off power soutce when placing an order.Please notice that oil may emulsify in case of over-intermittent operation for oil-lubricated type.
The above is fr your reference.For specific model selection,contact your nearest dealer or Hitachi local representative office.



BEBICON OIL
Hitachi BEBICON OIL is high-preformance oil which is specially developed for BEBICON compressors.To maximise  Energy-Saving effects,prevent performance degradation and protect BEBICON compressors from trouble or breakdown,it is necessary to use Hitachi genuine BEBICON OIL as the ONLY lubricating oil during maintenance.
Genuine Parts
Hitachi genuine parts must be used when maintaining a Hitachi BEBICON compressor,to keep your compressor from trouble or breakdown.


Features : Oil-Free Air Compressors
High Cooling Head
High Cooling Head with large aluminium alloy ventilated rib improves heat radiation and air capacity.In addtion,V-groove located between discharge and suction chamber reduces the heat transfer from dischatge chamber to suction chamber and improves air capacity.


Lead Air Valve
Lead Air Valve of I-shaped stainless steel on suction side improves air capacity and improves durability against rusting.

Hest Cut Piston Pin & Leak Cut Piston Ring
Heat Cut Piston Pin of heat-insulating material reduces heat transfer from the piston to thr needle bearing and keeps bearing at a relatively low temperature,improving the reliability.
Leak Cut Piston Ring of sepcially shaped abutment joint reduces air leakage and improves air capacity.




Specifications (HORIZONTAL & VERTICAL TANK MOUNT TYPE)

Tank Type	Operation Syste	Motor Output KW	Model	Maximum Pressure Mpa     (PSIG)	Compressor Speed        min	Displacement L/min       (CFM)	Capacity at Maximum Pressure L/min (CFM)	Air tank Capacity     L	Power Source     PH	Standard Accessories	External Dimensions WxDxH         mm	Weight
Horizontal	Pressure-switch type	0.75	0.75P-9.5VS 5A	0.93    (135)	990	126(4.5)	80(2.8)	62	1PH		931x376x804	80
			0.75P-9.5V 5A						3PH	Pressure gauge, Safety valve,		75
		1.5	1.5P-9-9.5S 5A		970	257(9.1)	165(5.8)	80	1PH	Hose joint, V-Belt, Belt cover,	1,173x418x855	96
			1.5P-9.5V 5A						3PH	Silencer, Stop valve	1,173x380x855	85
		2.2	2.2P-9.5VS 5A		730	386(13.6)	265(9.4)	90	1PH	Air outlet	1,283x434x860	147
			2.2P-9.5V 5A						3PH	1/4Bx1 for 0.75, 1.5 kW &	1,283x403x860	126
		3.7	3.7P-9.5V 5A		1000	541(19.1)	440(15.5)	125	3PH	2.2 kW, 3/8Bx1 for	1,345x428x923	160
		5.5	5.5P-9.5V5A		1,080	795(28.1)	630(22.2)	150	3PH	3.7 & 5.5 kW,	1,470x482x932	202
		7.5	7.5P-9.5V5A		950	1,027(36.3)	840(29.7)	235	3PH	3/4BX1 for 7.5 & 11kW	1,674x556x1,094	255
		11	11P-9.5V5A		1,050	1,546(54.6)	1,200(42.4)	260	3PH		1,793x611x1,098	326
Horizontal		3.7	3.7P-14VH5A	1.37     (199)	900	487((17.2)	400(14.1)	230	3PH	Pressure gauge, Safety valve,	1,624x525x1007	223
		5.5	5.5P-14VH5A		970	714(25.2)	550(19.4)	230	3PH	Hose joint, V-Belt, Belt cover,	1,624x566x1,015	262
		7.5	7.5P-14VH5A		900	973(34.3)	760(26.8)	230	3PH	Silencer, Stop valve	1,624x590x1,090	295
Vertical		3.7	3.7P-12.5(14)V5A	1.23/1.37 (178/199)	900	487(17.2)	400(14.1)	300	3PH	Air Outlet	957x590x1,732	420
		5.5	5.5P-12.5(14)V5A		970	714(25.2)	550(19.4)	300	3PH	3/8BX1 for 3.7 & 5.5kW,	1,025x611x1,734	450
		7.5	7.5P-12.5(14)V5A		900	973(34.3)	760(26.8)	300	3PH	3/4BX1 for 7.5kW	1,102x634x1,814	480

Specifications (HORIZONTAL TANK MOUNT TYPE)

Operation Systems	Motor Output KW	Model	Maximum Pressure Mpa (PSIG)	Compressor Speed        min	Displacement L/min(CFM)	Capacity at Maximum pressure L/min(CFM)	Air tank Capacity L	Power Source	Standard Accessories	External Dimensions WxDxH mm	Weight
Pressure-switch Type	0.75	0.75OP-9.5GS5A	0.93(135)	980	139 (4.9)	75(2.6)	80	1PH	Pressure gauge,Safety valve, Hose joint, V-Belt, Belt cover, Silencer, Stop valve	1,173 x 380 x 852	90
		0.75OP-9.5G5A						3PH			85
	1.5	1.5OP-9.5GS5A		880	278(9.8)	165(5.8)	80	1PH		1,173 x 431 x 897	121
		1.5OP-9.5G5A						3PH		1,173 x 393 x 897	110
	2.2	2.2OP-9.5GS5A		650	412(14.5)	240(8.5)	90	1PH		1,283 x 434 x 825	150
		2.2OP-9.5G5A						3PH		1,283 x 403 x 825	129
	3.7	3.7OP-9.5G5A		850	646(22.8)	405(14.3)	125	3PH	Air outlet1/4BX1 for 0.75 & 1.5 kW & 2.2kW, 3/8BX1 for 3.7 & 5.5 kW, 3/4BX1 for 7.5 & 11 kW	1,345 x 423 x 913	158
	5.5	5.5OP-9.5G5A		860	981(34.6)	605(21.3)	150	3PH		1,470 x 482 x 995	201
	7.5	7.50P-8.5GA5A	0.83(120)	915	1,347(47.6)	880(31.1)	235	3PH		1,674 x 552 x 1,045	282
	11	11OP-8.5GA5A		900	1,987(70.2)	1,285(45.4)	290	3PH		2,014 x 646 x 1,153	400

Super Oil Free BEBICON LE Series

Motor Output Kw(50Hz)	Model	Compressor				Air Tank Capacity (L)	External Dimensions   W x D   x H (mm)	Motor	Weight (KG)
		Max.Pressure Mpa (PSIG)	Control Pressure      ON-Off (Mpa)	Rotating Speed (min)	Capacity (L/min)
0.4	0.4LE-8S-5A	0.8 (116)	O.6 - 0.8	50 Hz	42	20	600x322x608	230V 1PH	30
				1360