KEY FEATURES
- Flow rate 0.0006 to 26 LPM with I/P tubing—flow rate depends on drive rpm, pump head, number of pump heads, and tubing size
- Digital interface with graphical LCD shows pump performance and operating mode— continuous run, timed dispense, copy dispense, or volume dispense
- Remote control available using analog communication—voltage, current and contact closure
- Select your preferred language from the user-friendly menu for programming and operation
- Dispense by Volume in mL (0.001 to 9,999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
- Antidrip function ensures dispensing accuracy
- Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
- Reversible motor—purge tubing before or after pumping and pump fluid in either direction
- Powerful motor lets you stack two pump heads for increased flow rates and for multichannel applications
- Splash-resistant ABS plastic controller and epoxy finished steel drive housings are IP33 rated
Specifications & Description
- Pump SeriesI/P
- Control TypeDigital Variable Speed
- Min RPM (rpm)0.1
- Max RPM (rpm)650
- SpeedVariable
- Speed Control±0.1%
- Max Flow Rate (LPM)26
- Min Flow Rate (LPM)0.0006
- Max Flow Rate (mL/min)26000
- Min Flow Rate (mL/min)0.6
- Reversible MotorYes
- Digital DispensingYes
- No. of Pump Heads Accepted2
- Type of Pump Heads AcceptedI/P Standard, I/P Easy-Load, I/P High-Performance
- Motor (watts)280
- Controller IP ratingIP 33
- Motor IP ratingIP 33
- Power (VAC)90 to 260
- Power (amps)4.5
- Power (Hz)50/60
- Controller Length (in)10.3437
- Controller Width (in)8.3281
- Controller Height (in)5.5
- Controller Length (mm)263
- Controller Width (mm)211
- Controller Height (mm)140
- Motor Length (in)14.25
- Motor Width (in)7
- Motor Height (in)6.5
- Motor Length (mm)362
- Motor Width (mm)178
- Motor Height (mm)165
- Open-Head SensorNo
- Housing MaterialABS Plastic and Aluminum Controller; Painted Steel and Aluminum Drive
- Motor hp3/8
- Remote I/O0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
- DescriptionI/P Digital Modular Drive w/ Remote I/O; 650 rpm
