KEY FEATURES
- Cartridges snap in and out for fast tubing changes—no need to remove pump head from the drive
- Load pump heads with 1 to 8 cartridges
- Mix large and small cartridges—one large cartridge occupies the same space as two small ones
- Flow rate 0.074 to 1700 mL/min with microbore or L/S tubing—flow rate depends on drive rpm, cartridge, and tubing size
- Accepts 1 to 8 small or 1 to 4 large cartridges
- Require drives with a minimum of 1⁄10 hp and a maximum of 600 rpm
- Constructed with stainless steel rotor and bearings with polysulfone ends
Specifications & Description
- Pump SeriesL/S
- Number of Channels8
- Max Flow Rate Per Channel (mL/min)1700
- Min Flow Rate Per Channel (mL/min)0.0015
- Max. Number of Cartridges (Large)4
- Max. Number of Cartridges (Small)8
- Housing MaterialPolysulfone (PSF)
- Tubing RetentionStopped Tubing or Manual
- OcclusionAdjustable Tangential
- Optimum RPM Range (rpm)0.02 to 600
- RollersThree
- Rotor MaterialAnodized Aluminum
- Suction Lift (ft)29
- Suction Lift (m)8.8
- Gear Ratio1:1
- Tubing sizes acceptedMicrobore two-stop tubing sets, L/S 13^, L/S 14^, L/S 16^, L/S 25^, L/S 17* Footnotes: ^Silicone, Tygon, C-FLEX, Puri-Flex, PharMed BPT, and Norprene; *Silicone and C-FLEX® only
- Volume Per Revolution With L/S 13 Tubing (mL)0.06
- Volume Per Revolution With L/S 14 Tubing (mL)0.21
- Volume Per Revolution With L/S 16 Tubing (mL)0.8
- Volume Per Revolution With L/S 25 Tubing (mL)1.7
- Volume Per Revolution With L/S 17 Tubing (mL)2.8
- Length (in)5.75
- Width (in)4.375
- Height (in)4
- Length (mm)14.6
- Width (mm)111
- Height (mm)102
- Open-Head SensorNo
- DescriptionL/S 8-channel, 3-roller cartridge pump head.
