您已经添加该商品到您的收藏列表
从您收藏列表中删除此商品。
这家公司已成功添加。 查看我的收藏.
这家公司已从你的收藏夹列表中删除。
这家公司已被添加到您的询问车。
这家公司已从询价车中删除。
该商品已被添加到您的询问车。
该商品已经从您的询价车中删除。
商品/公司已达到添加至询价车的数量。
登入NEWPAGES
保持登入状态
每日登录奖励

恭喜! 你获得了今天的每日登录奖励!

5 NP Point这是您获得的奖励!
查看您的每日登录奖励

确保每天回来登入以获更多的奖励!
谢谢!

Back
Seni Jaya Logo
PM Industrial Equipment Sdn Bhd
PM Industrial Equipment Sdn Bhd (401121K)
访客

TP-1519EC

09-Apr-2014
TP-1519EC
产品已浏览 190
TP-1519EC Series Entry Level Combo System

Economy series with seal area of 15” W x 19” L This L’ Sealer and Tunnel combination system is only 76” in total length. New feature for 2012 “Micro knife Seal Technology”. The tunnel features fully re-curculating air chamber, digital temperature control, pin wheel hole punch, 8 ft power cord and casters. Machines available in either 110 volt or 220 volt power. If you have 220 volt power available we recommend the 220 volt model as it will heat up faster in the morning and is less expensive to operate. See the 1519ECMC with optional space saver turn around conveyor

Specifications
  • Seal Area: 15” L x 19 ” W
  • Chamber size: 20 ” L x 16 ” W x 6 ” H
              *Chamber heights of 8″ are available at additional charge
  • Power: 110 volts – 20 amps – single phase
  • 220 volts – 15 amps – single phase
  • Warranty: 1 year on all parts
  • FOB: Rancho Cucamonga, CA

Models
  • TP-1519EC Economy System, basic machine with NO magnet hold down or power discharge conveyor. Operator simply holds seal bar down for desired time set via time control and applies seal pressure, when indicator light goes out operator releases seal bar and slides package from seal area tray into conveyor of shrink tunnel were it travels through tunnel and exits as a completed package. Speeds of 6 to 8 PPM
  • TP-1519ECM (Dual Magnet Hold Down) Same unit as above but with dual magnet hold down that allows operator to lower seal bar and the magnets will lock applying the seal pressure so the operator does not have to. Speeds of 7 to 10 PPM
  • TP-1519ECMC (Dual Magnet Hold Down and Power Discharge Conveyor) Same machine as above with Dual magnet hold down and “Powered Discharge Conveyor” that will automatically transfer package from seal area into shrink tunnel. This feature frees up the operator to turn and get the next package ready to place into the loading tray to increase production speeds. Speeds of 10 to 12 PPM
  • TP-1519ECMC-SS Stainless Steel models available
发信息至 PM Industrial Equipment Sdn Bhd

谢谢您的询问!
我们的客服会尽快联络您。

如需咨询或问题,联系我们
总办事处

PM Industrial Equipment Sdn Bhd (401121K)
69, Jalan Mutiara Emas 7/7, Taman Mount Austin, 81100 Johor Bahru, Johor, Malaysia.
Google Maps Waze

电话: +607-3517578, +607-3517579
传真: +607-3517576

邮件: khtan@pm-ie.com
网址: http://www.pm-ie.com

Powered by NEWPAGES